|
Energy Saver System
AUTOMATIC HOME AND SMALL BUSINESS POWER MANAGEMENT SYSTEM BOOST YOUR POWER FACTOR TO SAVE MONEY ON YOUR ELECTRIC BILL Power factor is like a percentage score of how well a motor or a transformer uses the power that it draws through your electric meter. A power factor of 100 is as good as it gets. Lower power factors cost you money. Think of it as a percentage 100% is great and 75% leaves a lot of room for improvement Not all electric appliances have a low power factor. Appliances that have heating elements have a 100% power factor. That means that your electric water heater, stove, oven, electric blanket and toaster are not the problem. Old fashion incandescent light bulbs also have a 100% power factor. Motors and fluorescent lights have low power factors. Our Premises have motors for air conditioners, furnace fans, refrigerators, chest freezers, clothes washer and dryers, dishwashers, sump pumps, garage door openers, power tools, fans and more.  |
|
| The Power Management system comes with Smart Electronics and a sensor at your feeder cable. The only system Ever designed to provide real-time detection of load and do correction automatically As well as provide total protection to all your electronic equipment |
 |
Saving Energy in Refrigerated Warehouse
THE BOTTOM LINE
What can efficiency measures achieve in financial and ecological benefits? By correcting electrical inefficiencies using the fast-payback methods described above, a plant can lower its electric consumption by 10 percent or more. At a facility using 500,000 kilowatt hours monthly, a 10 percent reduction would lower annual electric bills by RM 60,000 or more and annual carbon emissions by 500,000 pounds.
HOW WE REDUCE RUN TIMES OF COMPRESSORS
Freezers, and cool rooms, all have a “set point”, that is the temperature they are required to operate at and the compressor to which they are attached “cycles” to achieve that result.
By incorporating a microprocessor driven electronic thermostat into the “cycle” we are able to program the unit to “cycle” more efficiently, we reduce the operating parameters, thus the compressor run time is reduced by 25% and efficiency is increased by not allowing either over run or long run compressor time.
Electronic Ballast
The typical electronic ballast for the fluorescent lamp uses a half-bridge inverter and a boost DC-DC converter. The latter on the input side of the former also works as a power factor correction (PFC) circuit. Since a half-bridge inverter and a boost converter work independently in this ballast, each circuit needs a switching element and a control unit respectively. The electronic ballast
proposed in this paper consists of an electronic circuit with two functions. That is, a switching element in the buck-boost converter works as a switching device in the half-bridge inverter too. Then, this combined circuit can be used effectively as the electronic high-frequency ballast for fluorescent lamps
Features:
♦ Programmable preheat frequency
♦ Programmable preheat time
♦ Programmable run frequency
♦ Programmable over current protection
♦ Programmable end life protection
♦ saves power up to 30%
♦ Universal voltage adaptability Automatic shutdown on lamp failure
♦ Soft startup to prolong lamp life Daylight frequency ( similar to sunlight)
♦ Over current protection
♦ Very economical to operate
INFORMATION TECHNOLOGY IN PRODUCTION MANAGEMENT
We are living in an age of information technology. Industries today rely on digital displays such as the VISUAL IMFORMATION SYSTEM and the COMPUTER AIDED PRODUCTION MONITORING SYSTEM to generate reliable information in real time. MEGATRACK and VIS help managers make better production management decisions while simultaneously eliminating tedious paper work.
♦ Improvement of productivity between 5% - 10% in normal shifts.
♦ Improvement of productivity between 20% - 25% in night shifts.
♦ Optimizes work force and decreases downtime.
♦ Promotes healthy competition among production lines.
♦ Creates on organized environment with real-time information
♦ Builds both individual and collective pride
♦ Increases standards in professionalism
♦ Information generated is automatic and manipulation free.
Energy Savings Solutions for Air Conditioning and Refrigeration Systems
 |
A smart technology in compressor optimization SmartCold TM green technology is specifically designed to reduce the electricity usage (kWh) and demand (KW) of refrigeration and air conditioning compressors while maintaining temperature performance. Conventional controls, including the most sophisticated Building Management Systems (BMS) and state-of-the-art refrigeration controls, operate only on reaching pre¬programmed fixed (static) values to switch compressors off and on or adjust capacity. Rather than replacing existing controls, SmartCold TM interface directly with these controls to optimize the compressors and achieve greater energy efficiency. SmartCold TM products use two proprietary Firmware programs to achieve compressor optimization. These programs are copyright protected and the exclusive property of ETS Electrical Technology Sdn Bhd.. The Firmware allow SmartCold TM to reduce compressor run time by an average of 30%, without affecting cooling capacity or temperature requirements. This savings level may reach 50%, depending on applications and temperature conditions. In reducing the compressor run time, SmartCold TM save energy both through lower electricity usage (kWh) and decreased demand (KW). |
